Mesh Analysis 2

Today we did Mesh Analysis two.

We calculated the values of what we are going to measure.(V_6.8k=5V, V_10k=3.22V, and Current through the 10k-ohm as 3.22*10^-4 A)

We set it up.

We measured 3.18 V(measured in opposite direction) across 10k-ohm resistor.

And 4.96V across the 6.8k-ohm resistor.

After this lab we did exercises on how to detect and generate different types of current and voltage.

We used 10K-ohm resistor to measure voltage across it.

We generated sin wave and able to detect it.

Additionally, we did some other mesh problems.

Summary: In this lab, we calculated our voltages values we will me measuring at specific resistor using mesh method; we set it up and able to measure values very close to our calculation; The difference could be the difference in actual resistance and labeled resistance. We were also able to generate different kind of waves(current, voltage) and opened scope function to detect it. And at last, we did some other mesh problems.