 |
| 1st problem we did in the class.(we did not finish it) |
The Lab
 |
| We calculated the voltage we will be measuring at V1 and V2. (They are 2.424V and 4.424V respectly) |
 |
| This is our setup |
 |
| We measured 2.43V across V1 |
 |
| And we measured 4.39V across V2 |
Summary: If we calculate voltage of V1 and V2 with actual resistance, we get V1=2.442V and V2=4.442V which is very similar to what we calculated with theoretical resistance. All of the calculated voltages are not too far from measured voltages which conclude Nodal analysis is actually very good calculation/estimation.
No comments:
Post a Comment